Saturday, January 2, 2021

Microbial Metabolism : Energy, Enzymes and Regulation

Energy and Work

Energy may be most simply defined as the capacity to do work or to cause particular changes. Thus all physical and chemical processes are the result of the application or movement of energy. Living cells carry out three major types of work, and all are essential to life processes. Chemical work involves the synthesis of complex biological molecules required by cells from much simpler precursors; energy is needed to increase the molecular complexity of a cell.

Molecules and ions often must be transported across cell membranes against an electro-chemical gradient. For example, a molecule sometimes moves into a cell even though its concentration is higher internally. Similarly a solute may be expelled from the cell against a concentration gradient. This process is transport work and requires energy input in order to take up nutrients, eliminate wastes, and maintain ion balances.

The third type of work is mechanical work, perhaps the most familiar of the three. Energy is required to change the physical location of organisms, cells, and structures within cells.

The ultimate source of most biological energy is the visible sunlight impinging on the earth’s surface. Light energy is trapped by phototrophs during photosynthesis, in which it is absorbed by chlorophyll and other pigments and converted to chemical energy. As noted in chapter 5, chemolithoautotrophs derive energy by oxidizing inorganic compounds rather than obtaining it from light absorption.

Chemical energy from photosynthesis and chemolithotrophy can then be used by photolithoautotrophs and chemolithoautotrophs to transform CO2 into biological molecules such as glucose (figure 8.1).

The complex molecules manufactured by autotrophic organisms (both plant and microbial producers) serve as a carbon source for chemoheterotrophs and other consumers that use complex organic molecules as a source of material and energy for building their own cellular structures (it should be remembered that autotrophs also use complex organic molecules).

Chemoheterotrophs often employ O2 as an electron acceptor when oxidizing glucose and other organic molecules to CO2. This process, in which O2 acts as the final electron acceptor and is reduced to water, is called aerobic respiration. Much energy is released during this process. Thus, in the ecosystem, energy is trapped by photoautotrophs and chemolithoautotrophs; some of this energy subsequently flows to chemoheterotrophs when they use nutrients derived from autotrophs (figure 8.1).

Flow of Carbon and Energy in an Ecosystem


The CO2 produced during aerobic respiration can be incorporated again into complex organic molecules during photosynthesis and chemolithoautotrophy. Clearly the flow of carbon and energy in the ecosystem is intimately related.

Cells must efficiently transfer energy from their energygenerating or trapping apparatus to the systems actually carrying out work. That is, cells must have a practical form of energy currency.

Adenosine Triphosphate and Adenosine Diphosphate


In living organisms the major currency is adenosine 5′- triphosphate (ATP; figure 8.2). When ATP breaks down to adenosine diphosphate (ADP) and orthophosphate (Pi), energy is made available for useful work. Later, energy from photosynthesis, aerobic respiration, anaerobic respiration, and fermentation is used to resynthesize ATP from ADP and Pi. An energy cycle is created in the cell (figure 8.3).

Cell’s Energy Cycle


The Laws of Thermodynamics

To understand how energy is trapped or generated and how ATP functions as an energy currency, some knowledge of the basic principles of thermodynamics is required. The science of thermodynamics analyzes energy changes in a collection of matter (e.g., a cell or a plant) called a system. All other matter in the universe is called the surroundings. Thermodynamics focuses on the energy differences between the initial state and the final state of a system. It is not concerned with the rate of the process. 

For instance, if a pan of water is heated to boiling, only the condition of the water at the start and at boiling is important in thermodynamics, not how fast it is heated or on what kind of stove. Two important laws of thermodynamics must be understood. The first law of thermodynamics says that energy can be neither created nor destroyed. The total energy in the universe remains constant although it can be redistributed. For example, many energy exchanges do occur during chemical reactions (e.g., heat is given off by exothermic reactions and absorbed during endothermic reactions), but these heat exchanges do not violate the first law.

It is necessary to specify quantitatively the amount of energy used in or evolving from a particular process, and two types of energy units are employed. A calorie (cal) is the amount of heat energy needed to raise one gram of water from 14.5 to 15.5°C. The amount of energy also may be expressed in terms of joules (J), the units of work capable of being done. 

One cal of heat is equivalent to 4.1840 J of work. One thousand calories or a kilocalorie (kcal) is enough energy to boil 1.9 ml of water. A kilojoule is enough energy to boil about 0.44 ml of water, or enable a person weighing 70 kg to climb 35 steps. The joule is normally used by chemists and physicists. Because biologists most often speak of energy in terms of calories, this text will employ calories when discussing energy changes.

Second Law Process


Although it is true that energy is conserved in the universe, the first law of thermodynamics does not account for many physical and chemical processes. A simple example may help make this clear. Suppose a full gas cylinder is connected to an empty one by a tube with a valve (figure 8.4). If the valve is opened, gas flows from the full to the empty cylinder until the gas pressure is equal on both sides. Energy has not only been redistributed but also conserved.

The expansion of gas is explained by the second law of thermodynamics and a condition of matter called entropy. Entropy may be considered a measure of the randomness or disorder of a system. The greater the disorder of a system, the greater is its entropy. The second law states that physical and chemical processes proceed in such a way that the randomness or disorder of the universe (the system and its surroundings) increases to the maximum possible. Gas will always expand into an empty cylinder.

Free Energy and Reactions

The first and second laws can be combined in a useful equation, relating the changes in energy that can occur in chemical reactions and other processes.

ΔG = ΔH T x ΔS

ΔG is the change in free energy, ΔH is the change in enthalpy, T is the temperature in Kelvin (°C  -273), and ΔS is the change in entropy occurring during the reaction. The change in enthalpy is the change in heat content. Cellular reactions occur under conditions of constant pressure and volume. Thus the change in enthalpy is about the same as the change in total energy during the reaction. The free energy change is the amount of energy in a system available to do useful work at constant temperature and pressure. 

Therefore the change in entropy is a measure of the proportion of the total energy change that the system cannot use in performing work. Free energy and entropy changes do not depend on how the system gets from start to finish. A reaction will occur spontaneously at constant temperature and pressure if the free energy of the system decreases during the reaction or, in other words, if ΔG is negative. It follows from the equation that a reaction with a large positive change in entropy will normally tend to have a negative ΔG value and therefore occur spontaneously.

A decrease in entropy will tend to make ΔG more positive and the reaction less favorable.

The change in free energy has a definite, concrete relationship to the direction of chemical reactions. Consider the following simple reaction:


chemical reactions

If the molecules A and B are mixed, they will combine to form the products C and D. Eventually C and D will become concentrated enough to combine and produce A and B at the same rate as they are formed from A and B. The reaction is now at equilibrium: the rates in both directions are equal and no further net change occurs in the concentrations of reactants and products.

This situation is described by the equilibrium constant (Keq), relating the equilibrium concentrations of products and substrates to one another.

Keq =[C][D]/[A][B]

If the equilibrium constant is greater than one, the products are in greater concentration than the reactants at equilibrium—that is, the reaction tends to go to completion as written.

The equilibrium constant of a reaction is directly related to its change in free energy. When the free energy change for a process is determined at carefully defined standard conditions of concentration, pressure, pH, and temperature, it is called the standard free energy change (ΔGo). If the pH is set at 7.0 (which is close to the pH of living cells), the standard free energy change is indicated by the symbol ΔGo′.

The change in standard free energy may be thought of as the maximum amount of energy available from the system for useful work under standard conditions. Using ΔGo′ values allows one to compare reactions without worrying about variations in the ΔG due to differences in environmental conditions. The relationship between ΔGo′ and Keq is given by the following equation:

ΔGo´= -2.303RT.logKeq

R is the gas constant (1.9872 cal/mole-degree or 8.3145 J/moledegree), and T is the absolute temperature. Inspection of this equation shows that when ΔGo′ is negative, the equilibrium constant is greater than one and the reaction goes to completion as written. It is said to be an exergonic reaction (figure 8.5). In an endergonic reaction ΔGo′ is positive and the equilibrium constant is less than one. That is, the reaction is not favorable, and little product will be formed at equilibrium under standard conditions. Keep in mind that the ΔGo′ value shows only where the reaction lies at equilibrium, not how fast the reaction reaches equilibrium.

Equilibrium


The Role of ATP in Metabolism

Many reactions in the cell are endergonic and will not proceed far toward completion without outside assistance. One of ATP’s major roles is to drive such endergonic reactions more to completion.

ATP is a high-energy molecule. That is, it breaks down or hydrolyzes almost completely to the products ADP and Pi with a ΔGo′ of _7.3 kcal/mole.


ATP + H2O  >   ADP + Pi

In reference to ATP the term high-energy molecule does not mean that there is a great deal of energy stored in a particular bond of ATP. It simply indicates that the removal of the terminal phosphate goes to completion with a large negative standard free energy change, or the reaction is strongly exergonic. In other words, ATP has a high phosphate group transfer potential; it readily transfers its phosphate to water. The phosphate group transfer potential is defined as the negative of ΔGo′ for the hydrolytic removal of phosphate. A molecule with a higher group transfer potential will donate phosphate to one with a lower potential.

Thus ATP is ideally suited for its role as an energy currency.

It is formed in energy-trapping and -generating processes such as photosynthesis, fermentation, and aerobic respiration. In the cell’s economy, exergonic ATP breakdown is coupled with various endergonic reactions to promote their completion (figure 8.6). In other words ATP links energy-generating reactions, which liberate free energy, with energy-using reactions, which require free energy input to proceed toward completion. Facilitation of chemical work is the focus of the preceding example, but the same principles apply when ATP is coupled with endergonic processes involving transport work and mechanical work (figure 8.3).

ATP as a Coupling Agent


Oxidation-Reduction Reactions and Electron Carriers

Free energy changes are not only related to the equilibria of “regular” chemical reactions but also to the equilibria of oxidationreduction reactions. The release of energy normally involves oxidation-reduction reactions. Oxidation-reduction (redox) reactions are those in which electrons move from a donor, the reducing agent or reductant, to an electron acceptor, the oxidizing agent or oxidant. By convention such a reaction is written with the reductant to the right of the oxidant and the number (n) of electrons (e_) transferred.


Oxidant + ne  >  reductant

The oxidant and reductant pair is referred to as a redox couple (table 8.1). When an oxidant accepts electrons, it becomes the reductant of the couple. The equilibrium constant for the reaction is called the standard reduction potential (E0) and is a measure of the tendency of the reducing agent to lose electrons. The reference standard for reduction potentials is the hydrogen system with an E0 (the reduction potential at pH 7.0) of _0.42 volts or _420 millivolts.


2H+ + 2e  > H2

In this reaction each hydrogen atom provides one proton (H+) and one electron (e_).

Redox Couples


The reduction potential has a concrete meaning. Redox couple with more negative reduction potentials will donate electrons to couples with more positive potentials and greater affinity for electrons. Thus electrons will tend to move from reductants at the top of the list in table 8.1 to oxidants at the bottom because they have more positive potentials.

Electron Movement and Reduction Potentials


This may be expressed visually in the form of an electron tower in which the most negative reduction potentials are at the top (figure 8.7). Electrons move from donors to acceptors down the potential gradient or fall down the tower to more positive potentials. Consider the case of the electron carrier nicotinamide adenine dinucleotide (NAD+). The NAD+/NADH couple has a very negative E0 and can therefore give electrons to many acceptors, including O2.

NAD


Because NAD+/NADH is more negative than 1/2 O2/H2O, electrons will flow from NADH (the reductant) to O2 (the oxidant) as shown in figure 8.7.

NADH + H+ + 1/2O2   >   H2O + NAD+

When electrons move from a reductant to an acceptor with a more positive redox potential, free energy is released. The ΔGo′ of the reaction is directly related to the magnitude of the difference between the reduction potentials of the two couples (ΔE0). The larger the ΔE0, the greater the amount of free energy made available, as is evident from the equation

ΔGo´=__nFE´0

in which n is the number of electrons transferred and F is the Faraday constant (23,062 cal/mole-volt or 96,494 J/mole-volt).

For every 0.1 volt change in ΔE0, there is a corresponding 4.6 kcal change in ΔGo′ when a two-electron transfer takes place. This is similar to the relationship of ΔGo′ and Keq in other chemical reactions—the larger the equilibrium constant, the greater the ΔGo′. The difference in reduction potentials between NAD+/NADH and 1/2O2/H2O is 1.14 volts, a large ΔE0 value.

When electrons move from NADH to O2 during aerobic respiration, a large amount of free energy is made available to synthesize ATP (figure 8.8). If energy is released when electrons flow from negative to positive reduction potentials, then an input of energy is required to move electrons in the opposite direction, from more positive to more negative potentials. This is precisely what occurs during photosynthesis (figure 8.8). Light energy is trapped and used to move electrons from water to the electron carrier nicotinamide adenine dinucleotide phosphate (NADP+).

Energy Flow in Metabolism


The cycle of energy flow discussed earlier and illustrated in figure 8.1 can be understood from a different perspective, if the preceding concept is kept in mind. Photosynthetic organisms capture light energy and use it to move electrons from water (and other electron donors such as H2S) to electron acceptors, such as NADP+, that have more negative reduction potentials. These electrons can then flow back to more positive acceptors and provide energy for ATP production during photosynthesis. Photoautotrophs use ATP and NADPH to synthesize complex molecules from CO2. Chemoheterotrophs also make use of energy released during the movement of electrons by oxidizing complex nutrients during respiration to produce NADH. NADH subsequently donates its electrons to O2, and the energy released during electron transfer is trapped in the form of ATP. The energy from sunlight is made available to all living organisms because of this relationship between electron flow and energy.

Electron transport is important in aerobic respiration, anaerobic respiration, chemolithotrophy, and photosynthesis. Electron movement in cells requires the participation of carriers such as NAD+ and NADP+, both of which can transport electrons between different locations. The nicotinamide ring of NAD+ and NADP+ (figure 8.9) accepts two electrons and one proton from a donor, while a second proton is released. There are several other electron carriers of importance in microbial metabolism (table 8.1), and they carry electrons in a variety of ways.

Structure and Function of NAD


Flavin adenine dinucleotide (FAD) and flavin mononucleotide (FMN) bear two electrons and two protons on the complex ring system shown in figure 8.10. Proteins bearing FAD and FMN are often called flavoproteins. Coenzyme Q (CoQ) or ubiquinone is a quinone that transports electrons and protons in many respiratory electron transport chains (figure 8.11). Cytochromes and several other carriers use iron atoms to transport electrons by reversible oxidation and reduction reactions.


Fe3+ (ferric iron) + e  >  Fe2+ (ferrous iron)

In the cytochromes these iron atoms are part of a heme group (figure 8.12) or other similar iron-porphyrin rings. Several different cytochromes, each of which consists of a protein and an iron porphyrin ring, are a prominent part of respiratory electron transport chains. Some iron containing electron-carrying proteins lack a heme group and are called nonheme iron proteins. Ferredoxin is a nonheme iron protein active in photosynthetic electron transport and several other electron transport processes.

Structure and Function of FAD


Even though its iron atoms are not bound to a heme group, they still undergo reversible oxidation and reduction reactions. Although all the previously discussed molecules function in electron transport chains, some bear two electrons (NAD, FAD, and CoQ) while others carry only one electron at a time (cytochromes and nonheme iron proteins). This difference in the number of electrons carried is of great importance in the operation of electron transport chains.

Structure and Function of Coenzyme Q or Ubiquinone and Heme


Enzymes

Recall that an exergonic reaction is one with a negative ΔGo′ and an equilibrium constant greater than one. An exergonic reaction will proceed to completion in the direction written (that is, toward the right of the equation). Nevertheless, one often can combine the reactants for an exergonic reaction with no obvious result, even though products should be formed. It is precisely in these reactions that enzymes play their part.

Structure and Classification of Enzymes

Enzymes may be defined as protein catalysts that have great specificity for the reaction catalyzed and the molecules acted on. A catalyst is a substance that increases the rate of a chemical reaction without being permanently altered itself. Thus enzymes speed up cellular reactions. The reacting molecules are called substrates, and the substances formed are the products.  

Many enzymes are indeed pure proteins. However, many enzymes consist of a protein, the apoenzyme, and also a nonprotein component, a cofactor, required for catalytic activity.

The complete enzyme consisting of the apoenzyme and its cofactor is called the holoenzyme. If the cofactor is firmly attached to the apoenzyme it is a prosthetic group. Often the cofactor is loosely attached to the apoenzyme. It can even dissociate from the enzyme protein after products have been formed and carry one of these products to another enzyme (figure 8.13). Such a loosely bound cofactor is called a coenzyme.

Coenzymes as Carriers


For example, NAD+ is a coenzyme that carries electrons within the cell. Many vitamins that humans require serve as coenzymes or as their precursors. Niacin is incorporated into NAD+ and riboflavin into FAD. Metal ions may also be bound to apoenzymes and act as cofactors.

Despite the large number and bewildering diversity of enzymes present in cells, they may be placed in one of six general classes (table 8.2). Enzymes usually are named in terms of the substrates they act on and the type of reaction catalyzed. For example, lactate dehydrogenase (LDH) removes hydrogens from lactate.

                                          Lactate + NAD  LDH pyruvate + NADH + H+

Lactate dehydrogenase can also be given a more complete and detailed name, L-lactate: NAD oxidoreductase. This name describes the substrates and reaction type with even more precision.

Enzyme Classification


The Mechanism of Enzyme Reactions

It is important to keep in mind that enzymes increase the rates of reactions but do not alter their equilibrium constants. If a reaction is endergonic, the presence of an enzyme will not shift its equilibrium so that more products can be formed. Enzymes simply speed up the rate at which a reaction proceeds toward its final equilibrium.

How do enzymes catalyze reactions? Although a complete answer would be long and complex, some understanding of the mechanism can be gained by considering the course of a normal exergonic chemical reaction.

A + B            C + D

When molecules A and B approach each other to react, they form a transition-state complex, which resembles both the substrates and the products (figure 8.14). The activation energy is required to bring the reacting molecules together in the correct way to reach the transition state. The transition-state complex can then decompose to yield the products C and D. The difference in free energy level between reactants and products is ΔGo′. Thus the equilibrium in our example will lie toward the products because ΔGo′ is negative (i.e., the products are at a lower energy level than the substrates).

Enzymes Lower the Energy of Activation


Clearly A and B will not be converted to C and D in figure 8.14 if they are not supplied with an amount of energy equivalent to the activation energy. Enzymes accelerate reactions by lowering the activation energy; therefore more substrate molecules will have sufficient energy to come together and form products. Even though the equilibrium constant (or ΔGo′) is unchanged, equilibrium will be reached more rapidly in the presence of an enzyme because of this decrease in the activation energy.

Researchers have expended much effort in discovering how enzymes lower the activation energy of reactions, and the process is becoming clearer. Enzymes bring substrates together at a special place on their surface called the active site or catalytic site to form an enzyme-substrate complex (figures 8.15, 8.16). The enzyme can interact with a substrate in two general ways. It may be rigid and shaped to precisely fit the substrate so that the correct substrate binds specifically and is positioned properly for reaction. This mechanism is referred to as the lock-and-key model. An enzyme also may change shape when it binds the substrate so that the active site surrounds and precisely fits the substrate.

Enzyme Function


This has been called the induced fit model and is used by hexokinase and many other enzymes (figure 8.16). The formation of an enzyme-substrate complex can lower the activation energy in many ways. For example, by bringing the substrates together at the active site, the enzyme is, in effect, concentrating them and speeding up the reaction. An enzyme does not simply concentrate its substrates, however.

It also binds them so that they are correctly oriented with respect to each other in order to form a transition-state complex. Such an orientation lowers the amount of energy that the substrates require to reach the transition state. These and other catalytic site activities speed up a reaction hundreds of thousands of times, even though microorganisms grow between _20°C and approximately 113°C. These temperatures are not high enough to favor most organic reactions in the absence of enzyme catalysis, yet cells cannot survive at the high temperatures used by an organic chemist in routine organic syntheses. Enzymes make life possible by accelerating specific reactions at low temperatures.

Example of Enzyme-Substrate Complex Formation


The Effect of Environment on Enzyme Activity

Enzyme activity varies greatly with changes in environmental factors, one of the most important being the substrate concentration.

As will be emphasized later, substrate concentrations are usually low within cells. At very low substrate concentrations, an enzyme makes product slowly because it seldom contacts a substrate molecule. If more substrate molecules are present, an enzyme binds substrate more often, and the reaction velocity (usually expressed in terms of the rate of product formation) is greater than at a lower substrate concentration. Thus the rate of an enzyme-catalyzed reaction increases with substrate concentration (figure 8.17).

Eventually further increases in substrate concentration do not result in a greater reaction velocity because the available enzyme molecules are binding substrate and converting it to product as rapidly as possible. That is, the enzyme is saturated with substrate and operating at maximal velocity (Vmax).

Michaelis-Menten Kinetics


The resulting substrate concentration curve is a hyperbola (figure 8.17). It is useful to know the substrate concentration an enzyme needs to function adequately. Usually the Michaelis constant (Km), the substrate concentration required for the enzyme to achieve half maximal velocity, is used as a measure of the apparent affinity of an enzyme for its substrate. The lower the Km value, the lower the substrate concentration at which an enzyme catalyzes its reaction.

Enzymes also change activity with alterations in pH and temperature (figure 8.18). Each enzyme functions most rapidly at a specific pH optimum. When the pH deviates too greatly from an enzyme’s optimum, activity slows and the enzyme may be damaged.

pH, Temperature, and Enzyme Activity


Enzymes likewise have temperature optima for maximum activity. If the temperature rises too much above the optimum, an enzyme’s structure will be disrupted and its activity lost. This phenomenon, known as denaturation, may be caused by extremes of pH and temperature or by other factors. The pH and temperature optima of a microorganism’s enzymes often reflect the pH and temperature of its habitat. Not surprisingly bacteria growing best at high temperatures often have enzymes with high temperature optima and great heat stability.

Enzyme Inhibition

Microorganisms can be poisoned by a variety of chemicals, and many of the most potent poisons are enzyme inhibitors. A competitive inhibitor directly competes with the substrate at an enzyme’s catalytic site and prevents the enzyme from forming product. A classic example of this behavior is seen with the enzyme succinate dehydrogenase, which catalyzes the oxidation of succinate to fumarate in the tricarboxylic acid cycle. Malonic acid is an effective competitive inhibitor of succinate dehydrogenase because it so closely resembles succinate, the normal substrate (figure 8.19).

Competitive Inhibition of Succinate Dehydrogenase


After malonate binds to the enzyme, it cannot be oxidized and the formation of fumarate is blocked. Competitive inhibitors usually resemble normal substrates, but they cannot be converted to products.

Competitive inhibitors are important in the treatment of many microbial diseases. Sulfa drugs like sulfanilamide resemble p-aminobenzoate, a molecule used in the formation of the coenzyme folic acid. The drugs compete with p-aminobenzoate for the catalytic site of an enzyme involved in folic acid synthesis. This blocks the production of folic acid and inhibits bacterial growth. Humans are not harmed because they cannot synthesize folic acid and must obtain it in their diet.

Inhibitors also can affect enzyme activity by binding to the enzyme at some location other than at the active site. This alters the enzyme’s shape, rendering it inactive or less active. These inhibitors are often called noncompetitive because they do not directly compete with the substrate. Heavy metal poisons like mercury frequently are noncompetitive inhibitors of enzymes.

The Nature and Significance of Metabolic Regulation

The task of the regulatory machinery is exceptionally complex and difficult. Pathways must be regulated and coordinated so effectively that all cell components are present in precisely the correct amounts. Furthermore, a microbial cell must be able to respond effectively to environmental changes by using those nutrients present at the moment and by switching on new catabolic pathways when different nutrients become available. Because all chemical components of a cell usually are not present in the surroundings, microorganisms also must synthesize unavailable components and alter biosynthetic activity in response to changes in nutrient availability.

The chemical composition of a cell’s surroundings is constantly changing, and these regulatory processes are dynamic and continuously responding to altered conditions.

Regulation is essential for the cell to conserve microbial energy and material and to maintain metabolic balance. If a particular energy source is unavailable, the enzymes required for its use are not needed and their further synthesis is a waste of carbon, nitrogen, and energy. Similarly it would be extremely wasteful for a microorganism to synthesize the enzymes required to manufacture a certain end product if that end product were already present in adequate amounts. Thus both catabolism and anabolism are regulated in such a way as to maximize efficiency of operation.

The drive to maintain balance and conserve energy and material is evident in the regulatory responses of a bacterium like E. coli. If the bacterium is grown in a very simple medium containing only glucose as a carbon and energy source, it will synthesize the required cell components in balanced amounts. Addition of a biosynthetic end product (the amino acid tryptophan, for example) to the medium will result in the immediate inhibition of the pathway synthesizing that end product; synthesis of the pathway’s enzymes also will slow or cease. 

If E. coli is transferred to medium containing only the sugar lactose, it will synthesize the enzymes required for catabolism of this nutrient. In contrast, when E. coli grows in a medium possessing both glucose and lactose, glucose (the sugar supporting most rapid growth) is catabolized first. The culture will use lactose only after the glucose supply has been exhausted.

The flow of carbon through a pathway may be regulated in three major ways.

1. The localization of metabolites and enzymes in different parts of a cell, a phenomenon called metabolic channeling, influences pathway activity.

2. Critical enzymes often are directly stimulated or inhibited to alter pathway activity rapidly.

3. The number of enzyme molecules also may be controlled. The more catalyst molecules present, the greater the pathway’s activity. In bacteria regulation is usually exerted at the level of transcription. Control of mRNA synthesis is slower than direct regulation of enzyme activity but does result in the saving of much energy and raw material because enzymes are not synthesized when not required.

Each of these mechanisms is described in detail. This chapter introduces the first two: metabolic channeling and direct control of enzyme activity.

Metabolic Channeling

One of the most common channeling mechanisms is that of compartmentation, the differential distribution of enzymes and metabolites among separate cell structures or organelles. Compartmentation is particularly important in eucaryotic microorganisms with their many membrane-bound organelles. For example, fatty acid oxidation is located within the mitochondrion, whereas fatty acid synthesis occurs in the cytoplasmic matrix. The periplasm in procaryotes can also be considered an example of compartmentation. 

Compartmentation makes possible the simultaneous, but separate, operation and regulation of similar pathways. Furthermore, pathway activities can be coordinated through regulation of the transport of metabolities and coenzymes between cell compartments. Suppose two pathways in different cell compartments require NAD for activity. The distribution of NAD between the two compartments will then determine the relative activity of these competing pathways, and the pathway with access to the most NAD will be favored.

Channeling also occurs within compartments such as the cytoplasmic matrix. The matrix is a structured dense material with many subcompartments. In eucaryotes it also is subdivided by the endoplasmic reticulum and cytoskeleton. Metabolites and coenzymes do not diffuse rapidly in such an environment, and metabolite gradients will build up near localized enzymes or enzyme systems. This occurs because enzymes at a specific site convert their substrates to products, resulting in decreases in the concentration of one or more metabolites and increases in others.

For example, product concentrations will be high near an enzyme and decrease with increasing distance from it.

Channeling can generate marked variations in metabolite concentrations and therefore directly affect enzyme activity. Substrate levels are generally around 10-3 moles/liter (M) to 10-6 M or even lower. Thus they may be in the same range as enzyme concentrations and equal to or less than the Michaelis constants (Km) of many enzymes. Under these conditions the concentration of an enzyme’s substrate may control its activity because the substrate concentration is in the rising portion of the hyperbolic substrate saturation curve (figure 8.20).

Control of Enzyme Activity by Substrate Concentration

 

As the substrate level increases, it is converted to product more rapidly; a decline in substrate concentration automatically leads to lower enzyme activity. If two enzymes in different pathways use the same metabolite, they may directly compete for it. The pathway winning this competition—the one with the enzyme having the lowest Km value for the metabolite—will operate closer to full capacity. Thus channeling within a cell compartment can regulate and coordinate metabolism through variations in metabolite and coenzyme levels.

Control of Enzyme Activity

Adjustment of the activity of regulatory enzymes controls the functioning of many metabolic pathways. This section describes these enzymes and discusses their role in regulating pathway activity.

Allosteric Regulation

Usually regulatory enzymes are allosteric enzymes. The activity of an allosteric enzyme is altered by a small molecule known as an effector or modulator. The effector binds reversibly by noncovalent forces to a regulatory site separate from the catalytic site and causes a change in the shape or conformation of the enzyme (figure 8.21). The activity of the catalytic site is altered as a result. A positive effector increases enzyme activity, whereas a negative effector decreases activity or inhibits the enzyme. These changes in activity often result from alterations in the apparent affinity of the enzyme for its substrate, but changes in maximum velocity also can occur.

Allosteric Regulation


The kinetic characteristics of nonregulatory enzymes show that the Michaelis constant (Km) is the substrate concentration required for an enzyme to operate at half its maximal velocity. This constant applies only to hyperbolic substrate saturation curves, not to the sigmoidal curves often seen with allosteric enzymes (figure 8.23). The substrate concentration required for half maximal velocity with allosteric enzymes having sigmoidal substrate curves is called the [S]0.5 or K0.5 value.

One of the best-studied allosteric regulatory enzymes is the aspartate carbamoyltransferase (ACTase) from E. coli. The enzyme catalyzes the condensation of carbamoyl phosphate with aspartate to form carbamoylaspartate (figure 8.22). ACTase catalyzes the rate-determining reaction of the pyrimidine biosynthetic pathway in E. coli. The substrate saturation curve is sigmoidal when the concentration of either substrate is varied (figure 8.23). The enzyme has more than one active site, and the binding of a substrate molecule to an active site increases the binding of substrate at the other sites. In addition, cytidine triphosphate (CTP), an end product of pyrimidine biosynthesis, inhibits the enzyme and the purine ATP activates it. Both effectors alter the K0.5 value of the enzyme but not its maximum velocity.

ACTase Regulation


CTP inhibits by increasing K0.5 or by shifting the substrate saturation curve to higher values. This allows the enzyme to operate more slowly at a particular substrate concentration when CTP is present. ATP activates by moving the curve to lower substrate concentration values so that the enzyme is maximally active over a wider substrate concentration range. Thus when the pathway is so active that the CTP concentration rises too high, ACTase activity decreases and the rate of end product formation slows. In contrast, when the purine end product ATP increases in concentration relative to CTP, it stimulates CTP synthesis through its effects on ACTase.

The Kinetics of E. coli Aspartate Carbamoyltransferase


E. coli aspartate carbamoyltransferase provides a clear example of separate regulatory and catalytic sites in allosteric enzymes. The enzyme is a large protein composed of two catalytic subunits and three regulatory subunits (figure 8.24a). The catalytic subunits contain only catalytic sites and are unaffected by CTP and ATP. Regulatory subunits do not catalyze the reaction but do possess regulatory sites to which CTP and ATP bind. When these effectors bind to the complete enzyme, they cause conformational changes in the regulatory subunits and subsequently in the catalytic subunits and their catalytic sites. The enzyme can change reversibly between a less active T form and a more active R form (figure 8.24b,c). Thus the regulatory site influences a catalytic site about 6.0 nm distant.

Structure and Regulation of E. coli Aspartate Carbamoyl transferase


Covalent Modification of Enzymes

Regulatory enzymes also can be switched on and off by reversible covalent modification. Usually this occurs through the addition and removal of a particular group, one form of the enzyme being more active than the other. For example, glycogen phosphorylase of the bread mold Neurospora crassa exists in phosphorylated and dephosphorylated forms called phosphorylase a and phosphorylase b, respectively (figure 8.25).

Reversible Covalent Modification of Glycogen Phosphorylase

 

Phosphorylase b is inactive because its required activator AMP is usually not present at sufficiently high levels. Phosphorylase a, the phosphorylated form, is active even without AMP. Glycogen phosphorylase is stimulated by phosphorylation of phosphorylase b to produce phosphorylase a. The attachment of phosphate changes the enzyme’s conformation to an active form. Phosphorylation and dephosphorylation are catalyzed by separate enzymes, which also are regulated.

Enzymes can be regulated through the attachment of groups other than phosphate. One of the most intensively studied regulatory enzymes is E. coli glutamine synthetase, a large, complex enzyme existing in two forms (figure 8.26). When an adenylic acid residue is attached to each of its 12 subunits forming an adenylylated enzyme, glutamine synthetase is not very active. Removal f AMP groups produces more active deadenylylated glutamine synthetase, and glutamine is formed. The glutamine synthetase system differs from the phosphorylase system in two ways: (1) AMP is used as the modifying agent, and (2) the modified form of glutamine synthetase is less active. Glutamine synthetase also is allosterically regulated.

Structure of E. coli Glutamine Synthetase


There are some advantages to using covalent modification for the regulation of enzyme activity. These interconvertible enzymes often are also allosteric. Because each form can respond differently to allosteric effectors, systems of covalently modified enzymes are able to respond to more stimuli in varied and sophisticated ways. Regulation can also be exerted on the enzymes that catalyze the covalent modifications, which adds a second level of regulation to the system.

Feedback Inhibition

The rate of many metabolic pathways is adjusted through control of the activity of the regulatory enzymes described in the preceding section. Every pathway has at least one pacemaker enzyme that catalyzes the slowest or rate-limiting reaction in the pathway. Because other reactions proceed more rapidly than the pacemaker reaction, changes in the activity of this enzyme directly alter the speed with which a pathway operates. Usually the first step in a pathway is a pacemaker reaction catalyzed by a regulatory enzyme.

The end product of the pathway often inhibits this regulatory enzyme, a process known as feedback inhibition or end product inhibition. Feedback inhibition ensures balanced production of a pathway end product. If the end product becomes too concentrated, it inhibits the regulatory enzyme and slows its own synthesis. As the end product concentration decreases, pathway activity again increases and more product is formed. In this way feedback inhibition automatically matches end product supply with the demand. The previously discussed E. coli aspartate carbamoyl transferase is an excellent example of end product or feedback inhibition.

Frequently a biosynthetic pathway branches to form more than one end product. In such a situation the synthesis of pathway end products must be coordinated precisely. It would not do to have one end product present in excess while another is lacking.

Feedback Inhibition


Branching biosynthetic pathways usually achieve a balance between end products through the use of regulatory enzymes at branch points (figure 8.27). If an end product is present in excess, it often inhibits the branch-point enzyme on the sequence leading to its formation, in this way regulating its own formation without affecting the synthesis of other products. In figure 8.27 notice that both products also inhibit the initial enzyme in the pathway. An excess of one product slows the flow of carbon into the whole pathway while inhibiting the appropriate branch-point enzyme. Because less carbon is required when a branch is not functioning, feedback inhibition of the initial pacemaker enzyme helps match the supply with the demand in branching pathways.

The regulation of multiple branched pathways is often made even more sophisticated by the presence of isoenzymes, different enzymes that catalyze the same reaction. The initial pacemaker step may be catalyzed by several isoenzymes, each under separate and independent control. In such a situation an excess of a single end product reduces pathway activity but does not completely block pathway function because some isoenzymes are still active.

2 comments: